Simple Steps How to Upholster a Headboard
How to upholster a headboard – Firstly is marks above the foam measurements. The measures must be the same as the wooden board and consider 5 cm more in each of the sides of the table. Then, the next step is to cut the foam. Thickness of the rubber foam usually is standard so you will have no difficulty in cutting it.
He rests his head on the floor or on top of a very large table and rests foam above the cylinder head. You will need to bend the foam coming out of the board towards the rear and pillar. Next steps about how to upholster a headboard, once you poured foam to the head do the same thing with the fabric. But you’d better put the cloth on the floor from the side that will be exhibited at the bedside, being careful not to dirty it, rests his head with rubber face feather down.
Also, the measures of the fabric should be slightly larger than the table. In this case at least 7 centimeters bigger. Cut with scissors. After that, also draw stuff to the table staring at the cloth every 2 to 3 cm well pulling the fabric avoiding that folds remain. You can put your head in your bedroom now. And that is a simple step about how to upholster a headboard.